Error localization review packet: seven metadata documents a laboratory prepares, in order

Short answer

A review packet for error localization holds seven metadata-only documents, assembled in this order: a task statement, a system route map, the versions kept in each system, an agent map (who or what created each version), an acceptance check fixed in advance, a volume and span summary, and a rights and sensitivity note. Together they let SourceX judge whether a lab's correction histories can show the first step where a value went wrong. The quality manager usually leads; no patient or client records go in before an agreement.

Visual briefFull-size diagram
Seven numbered documents drop one by one into an open review tray: task statement, system route map, versions per system, agent map, acceptance check, volume and span, and rights note, each tagged with the role that prepares it; the tray is marked no patient records.
Illustrative packet order for a laboratory. The packet holds descriptions and counts, never patient or client records.

This list belongs to error localization. It follows the introducer's conversation: the qualification scorecard decides whether to introduce, and the evidence gaps analysis explains which weaknesses the packet should state.

The seven documents at a glance

Each document builds on the one before. The acceptance check, for instance, names systems, so it cannot be written until the system route map exists.

OrderDocumentWhat it showsPrepared by
1Task statementThe one question each case answersQuality manager
2System route mapEvery system the value passes through, in orderIT or integration lead
3Versions kept per systemWhat record survives in each system, and for how longLab system administrator with integration lead
4Agent mapWhich person, software or device creates each versionQuality manager
5Acceptance checkThe test an answer must pass, fixed before reviewLaboratory director with quality manager
6Volume and spanCorrections per month, share involving units or ranges, retained monthsQuality manager
7Rights and sensitivity noteIdentifiers in each system, client and vendor terms, the authorizerCompliance lead, counsel or CEO

Documents 1 to 4: defining the case and its route

1. Task statement. One sentence, for example: given a corrected result and its step history, identify the first step at which the value or unit differs from the source reading (the value the analyzer first produced), or confirm that no step differs. The "or confirm" clause matters; it mirrors how the ProcessBench benchmark asks models to find the earliest erroneous step or conclude that all steps are correct.

2. System route map. The systems in order, with the system of record for each: analyzer, lab information system, interface engine, receiving record at the client. Include middleware if it touches values, and note any system the lab does not control.

3. Versions kept per system. Raw analyzer output files; correction entries with status and reason; outbound message logs; receiving-side display or audit records, where the lab can see them. State the retention of each. In U.S. clinical labs the report stage is fixed by rule, since 42 CFR 493.1291 requires both the original and the corrected report to be kept; say whether the lab records corrections with a status that separates a fix from new information, as the HL7 "corrected" and "amended" status codes do.

4. Agent map. For each system, what creates the version: a named technologist, an interface template, a device. The HL7 Provenance resource is a useful model, because it records the agents responsible for each version, whether people, organizations, software or devices. The lab does not need that standard; it needs to say whether its audit trail answers the same question.

Document 5: the acceptance check, written before review

Without a fixed check, "the interface did it" is an opinion. With one, anyone holding the step history can test the answer. The packet states, in advance:

  • ☐
    The answer names exactly one step, or states that no step differs.
  • ☐
    At the named step, the recorded value or unit first differs from the source reading.
  • ☐
    Every earlier step matches the source reading.
  • ☐
    The original and the corrected report are both retained.
  • ☐
    The final corrected report is linked to the earlier versions, so the case has an outcome.

For the glucose example on the main guide, the correct answer is the third step, the interface engine: the analyzer and correction entry match, and the outbound message is the first to show the wrong unit. Cases that fail any condition stay out of the set, and the packet reports how many.

Documents 6 and 7: volume, span and rights

6. Volume and span. Corrected reports per month; the share involving a unit, reference range or mapping problem rather than a re-test; months of retained interface logs; dates of interface, template or system changes. Use ranges if exact counts would take a project to produce.

7. Rights and sensitivity note. Patient identifiers appear in every system, so name them by type. List clinician names, the interface vendor's terms and any client contracts that limit reuse, and name who can authorize a licensing discussion. The review of those terms happens with SourceX after the introduction; the introducer does not read the contracts.

Illustrative cover sheet

This cover sheet is fictional, for a 310-person regional clinical laboratory. It shows the expected level of detail.

FieldEntry
TaskFirst step where value or unit differs from source reading
SystemsAnalyzer, lab information system, interface engine, client record
Interface log retentionOutbound message content kept 18 months
CorrectionsRoughly 150 per month; about one in ten involve a unit or range
Change controlMapping changes ticketed for the last three years
Identifiers presentPatient name, date of birth, accession number, ordering clinician
Client termsHospital outreach contracts under review by counsel
AuthorizerCEO, with the laboratory director consulted

Where interface logs tend to live is covered on integration error records. For framing the conversation with healthcare operators before any of this, see how advisors introduce healthcare administration clients. Eligibility still applies: 50 or more full-time employees at peak, documented history, rights to license and an authorized contact. Companies in the U.S., Canada and the EU qualify, as do companies in the UK, Australia, New Zealand, India, Singapore, South Africa, Latin America, the UAE and Saudi Arabia when at least 70% of the data is in English. Other record families are listed under data types.

Next step

Refer a company. No cap on rewards. Default reward on a company's first qualifying transaction: the greater of $50,000 plus 5% and 15% of Actual Supplier Payout, with no cap; further qualifying transactions first agreed within 12 months of the first Closing pay 15%. Eligibility and payment conditions apply, including the USD 100,000 Minimum Transaction, and a signed Schedule A or addendum can differ. A lead, meeting or signature alone does not trigger payment.

If the quality manager could fill most of the seven slots from what the lab already keeps, register as a partner, confirm the lab against who qualifies and read the terms, then introduce the CEO and let the lab prepare the packet with SourceX.

  1. Step 1Share your linkSend your personal link to a company you know.
  2. Step 2Company appliesThe company applies itself at /apply.
  3. Step 3Company signs and is paidThe company signs, delivers its data and is paid by SourceX under its agreement.
  4. Step 4You get your rewardthe greater of $50,000 plus 5% and 15% of the actual supplier payout, with no cap. A reward becomes payable after SourceX has paid the referred company under its signed agreement and the payout conditions in the program terms are met, including finance approval and your tax and payment details.

Common questions

Who in the laboratory leads the packet?

Usually the quality manager, because corrections, reasons and acceptance criteria sit with quality. IT or the integration team supplies the system route map and log retention, and the CEO or counsel signs off the rights note.

Can the packet include one de-identified example case?

Not before an agreement. The packet describes the class of cases in words, dates and counts. Any example record is exchanged later, under SourceX's process and the agreed de-identification.

Does the introducer need to read the packet?

No. The introducer's part ends with the introduction. Sharing this list with the owner helps them see the work involved before deciding.

Sources

  1. hl7.org/fhir/provenance.html
  2. hl7.org/fhir/R4B/valueset-observation-status.html
  3. arxiv.org/abs/2412.06559
  4. ecfr.gov/current/title-42/chapter-IV/subchapter-G/par…
  5. refer.sourcex.si/terms

Free resources

Know a company with valuable proprietary data?

Become a referral partner, get your link and introduce the company’s CEO (in an owner-run company, usually the owner). Referral partners can join from most countries. We can't work with partners in countries or regions under U.S. sanctions or on U.S. restricted-party lists. The companies you introduce should be based in the U.S., Canada and the EU, or in the UK, Australia, New Zealand, India, Singapore, South Africa, Latin America, the UAE and Saudi Arabia with at least 70% of their data in English.

Refer a company →

I own a business

Explore licensing your company's data directly to SourceX for AI training and evaluation. Start a short assessment; no uploads needed.

Start an assessment