Temperature excursion handling, a worked hard case: one cross-dock transfer, two lots, two different decisions

Short answer

The records that explain a temperature excursion are the logger alert with its gap and readings, the handling instruction followed at the time, the escalation and deviation report, and the quality disposition that names who decided and why, per lot. In the worked case below, one pallet produces two different decisions because one lot already carried an earlier excursion. That sequence is useful evidence because every decision left a record a reviewer can check against the rule.

Visual briefFull-size diagram
A case timeline runs from the cross-dock transfer through the logger alarm, isolation, escalation and deviation report, then branches: Lot A, with no earlier excursion, is released; Lot B, whose earlier inbound excursion used up its allowance, is rejected; each decision shows the record it left.
Illustrative case at a fictional distributor. Times, lots and readings are invented to show the record chain.

This worked case is part of exception handling records for AI agents, which sets cold-chain excursions alongside entitlement and promotion cases. In the six-class exception taxonomy it is an out-of-tolerance exception. This page slows one case down to show each decision, the person who made it and the record it left.

The case: a cross-dock transfer that goes out of range (Illustrative)

The company is fictional: a 250-person pharmaceutical wholesaler in the EU, distributing refrigerated injectable products to hospitals and pharmacies. Every value below is invented.

A pallet labeled for 2 to 8°C storage carries two lots of the same product, Lot A and Lot B, bound for a regional hospital. Lot B arrived at the wholesaler's warehouse a month earlier after a short inbound excursion, which was investigated and closed with the lot released. At 06:10 the pallet is moved from a trunk vehicle to a delivery van at a cross-dock. The data logger stops reporting as the pallet leaves the first vehicle.

Step by step: who decided what, and the record each decision left

TimeWhat happenedWho decidedRecord created
06:10Transfer starts; logger stops reportingNobody; a gap beginsLogger platform: last reading 5.2°C, then no data
06:48Logger reconnects in the van and reads 11.4°C; alarm firesThe alarm systemAlarm event with time, reading and threshold
06:52Driver isolates the pallet in the van's cooled section and stops the deliveryDriver, following the written transport instructionDriver app entry citing the instruction number
07:05Dispatcher, under pressure from the hospital, asks whether to deliver anyway; escalates insteadDispatcher, choosing escalation over deliveryEscalation ticket to on-call quality, time-stamped
07:20On-call quality places both lots on holdOn-call quality associateQuarantine status in the warehouse system
07:40Deviation report sent to the hospital and the manufacturerQuality, as procedure requiresDeviation record in the quality system, with distribution list
Day 2, 10:00Full logger download: 38-minute gap, then 26 minutes above 8°C, peak 11.4°CQuality analystLogger file attached to the deviation
Day 2, 15:30Manufacturer's quality unit assesses against stability data, lot by lotManufacturer's quality unitWritten assessment referencing each lot's excursion history
Day 3, 09:00Lot A released; Lot B rejectedWholesaler's quality leadDisposition per lot, signed in the quality system

Three points make this a hard case rather than a routine one. The gap means nobody knows the temperature for 38 minutes. The dispatcher faced a real, documented pressure to deliver. And the right answer differed by lot.

Some of this chain is required, not optional. The EU's Good Distribution Practice guidelines expect alarms on excursions from pre-defined storage conditions, a procedure for investigating and handling excursions, and reporting of transport excursions to the distributor and recipient. In the United States, warehousing procedures must cover quarantine before release by the quality control unit and storage under appropriate temperature conditions. Regulation makes the records more likely to exist; it does not make them linked or retained for years.

The branch: why Lot A and Lot B ended differently

Lot A had no prior excursion. The manufacturer's stability data allowed the combined exposure, so it was released, with the disposition citing the deviation number.

Lot B had used part of the same allowance during its inbound excursion a month earlier. Added together, the two events exceeded what the stability data supported, so it was rejected and sent for destruction, with a credit note issued to the hospital and a replacement shipped from another lot.

The branch only exists in the records because Lot B's earlier deviation was linked to the lot number. Had the inbound excursion been closed in a separate system, or recorded against a shipment instead of a lot, quality might have released both lots on the evidence of this event alone. That is the lesson for anyone judging the archive: the decisive record was a month old and came from a different leg.

Why this sequence is useful evidence

For AI training and evaluation, the case has what routine shipments lack:

  • A decision under uncertainty. The 38-minute gap forces a judgment, and the records show which evidence was used to make it.
  • A tempting wrong path, refused. The dispatcher's escalation ticket shows the option to deliver was considered and declined. An agent that would have delivered fails this case.
  • Authority at each step. Driver, dispatcher, on-call quality, manufacturer and quality lead each acted within a defined role, and each left a time-stamped record.
  • History-dependent outcome. The same event produced two dispositions, which tests whether a system looks beyond the current event.
  • A checked result. Release, rejection, credit note and replacement are all recorded, so the outcome can be confirmed.

Where these records sit in validated electronic systems, U.S. rules for closed systems require secure, computer-generated, time-stamped audit trails in which changes do not obscure earlier entries. That property is what lets a reviewer trust that the 07:05 escalation really happened before the 07:20 hold.

Spotting similar cases at a client

Listen for these signals in conversation with a quality director, logistics manager or COO at a wholesaler, 3PL, specialty pharmacy, clinical supply firm or food distributor:

  1. Excursions are investigated in a quality management system, not a spreadsheet or email.
  2. Dispositions are recorded per lot or batch, with the approver named.
  3. Earlier deviations can be found from the lot number.
  4. Handling instructions are numbered and versioned, so the driver's entry can cite one.
  5. Logger data is attached to the deviation, not left only in the sensor platform.
  6. Several years of closed deviations still exist, along with the outcomes (release, rejection, credit).

Two or three yeses suggest a company worth introducing. Partners ask about these at metadata level only: never request deviation reports, logger files or lot numbers. More on spotting resolved exceptions is in logistics exceptions and their documented resolutions; sector context is on logistics and warehousing and healthcare operations.

The company needs 50+ full-time employees at peak (contractors excluded), documented operating history, rights to license and an authorized contact. Companies in the U.S., Canada and the EU qualify, as do companies in the UK, Australia, New Zealand, India, Singapore, South Africa, Latin America, the UAE and Saudi Arabia when at least 70% of the data is in English. Quality agreements with manufacturers may limit what the wholesaler can license, so rights stay open until SourceX reviews them with the company.

Next step

Refer a company. No cap on rewards. Default reward on a company's first qualifying transaction: the greater of $50,000 plus 5% and 15% of Actual Supplier Payout, with no cap; further qualifying transactions first agreed within 12 months of the first Closing pay 15%. Eligibility and payment conditions apply, including the USD 100,000 Minimum Transaction, and a signed Schedule A or addendum can differ. A lead, meeting or signature alone does not trigger payment.

If a client investigates excursions in a quality system and records dispositions per lot with a named approver, register as a partner, check who qualifies, and read the terms before you introduce the quality director and the executive who owns those records.

  1. Step 1Share your linkSend your personal link to a company you know.
  2. Step 2Company appliesThe company applies itself at /apply.
  3. Step 3Company signs and is paidThe company signs, delivers its data and is paid by SourceX under its agreement.
  4. Step 4You get your rewardthe greater of $50,000 plus 5% and 15% of the actual supplier payout, with no cap. A reward becomes payable after SourceX has paid the referred company under its signed agreement and the payout conditions in the program terms are met, including finance approval and your tax and payment details.

Common questions

Why did the two lots end differently if they were on the same pallet?

Because the decision depends on each lot's full history, not just this event. In the illustrative case, one lot had already used part of its allowance on an earlier leg, so the same 38-minute gap pushed it over the limit.

Is this regulatory advice on excursion handling?

No. The case is fictional and shows how records chain together. Actual handling depends on the product's labeling, the manufacturer's stability data and the company's own procedures.

Do I need to understand stability data to introduce a company?

No. Ask whether excursions are investigated in a quality system, whether each disposition names who decided, and how many years exist. SourceX and the company handle everything after that.

Sources

  1. eur-lex.europa.eu/legal-content/EN/TXT
  2. ecfr.gov/current/title-21/chapter-I/subchapter-C/part…
  3. ecfr.gov/current/title-21/chapter-I/subchapter-A/part…
  4. refer.sourcex.si/terms

Free resources

Know a company with valuable proprietary data?

Become a referral partner, get your link and introduce the company’s CEO (in an owner-run company, usually the owner). Referral partners can join from most countries. We can't work with partners in countries or regions under U.S. sanctions or on U.S. restricted-party lists. The companies you introduce should be based in the U.S., Canada and the EU, or in the UK, Australia, New Zealand, India, Singapore, South Africa, Latin America, the UAE and Saudi Arabia with at least 70% of their data in English.

Refer a company →

I own a business

Explore licensing your company's data directly to SourceX for AI training and evaluation. Start a short assessment; no uploads needed.

Start an assessment